Language switcher
Two Cylinder Thermal Engine
The engine is mounted with the gas tank on a base plate and is started by turning the flywheel. Base plate and motor are made of black anodised aluminium.
To start the engine, it must be preheated. After a short time the open flame goes out and the catalytic converter takes over the heating.
(This a machine translation.)
| model | Two Cylinder Thermal Engine MM-9 |
|---|---|
| rotation speed control | via tank volve |
| crank shaft | ball bearing mounted |
| cylinder capacity | two times 1.0 cm³ |
| rotation speed | 3,000 rpm |
| ignition | piezo high voltage ignition |
| running time | 10 min/tankful |
| height × width × length | 150 mm × 85 mm × 170 mm |
| weight | 700 g |